How to Use & Clean LuvLap Electric Breast Pump (Step-by-Step Guide for Moms)

Loading views... Views

An electric breast pump can make breastfeeding easier, faster, and more flexible for modern mothers. However, many parents search for help when their LuvLap electric breast pump is not working properly, losing suction, or needs cleaning and sterilization guidance.

This complete guide explains:

how to use LuvLap electric breast pump correctly
how to clean breast pump parts safely
how to sterilize pump accessories
how to fix suction problems
which spare parts may need replacement

So you can pump comfortably and confidently every day.

How to Use LuvLap Electric Breast Pump Step by Step

Using your pump correctly improves milk flow and prevents discomfort.

Step 1: Assemble the Pump Properly

Before starting, connect:

breast shield (flange)
tubing
valve
diaphragm
bottle
motor unit

Make sure each part fits tightly to maintain suction efficiency.

Step 2: Position the Breast Shield Correctly

Place the flange so your nipple stays centered inside the tunnel. Incorrect positioning reduces milk output and causes discomfort.

Tip: If your nipple rubs against the sides, try a different flange size.

Step 3: Adjust Suction Settings Gradually

Start with low suction and slowly increase to a comfortable level. This mimics a baby’s natural feeding rhythm and improves milk expression.

Step 4: Begin Pumping

Press the start button and relax. Stress can reduce milk flow, so sit comfortably and breathe deeply.

Step 5: Store Breast Milk Safely

Transfer milk into sterilized storage bottles or bags and label with date and time before refrigerating.

Step 6: Turn Off and Disassemble the Pump

Detach all milk-contact parts immediately after pumping for cleaning.

How to Clean LuvLap Electric Breast Pump Properly

Cleaning pump parts after every use helps maintain hygiene and suction strength.

Step 1: Disassemble All Milk-Contact Parts

Remove:

breast shield
bottle
valve
diaphragm
connectors

Step 2: Rinse Immediately After Use

Rinse with warm water to prevent milk residue buildup.

Step 3: Wash Using Mild Soap and Warm Water

Use a soft brush to clean hidden areas where milk can collect.

Avoid strong antibacterial detergents.

Step 4: Clean Breast Pump Tubing Carefully

Tubing usually doesn’t contact milk but should remain dry and dust-free.

If moisture appears inside tubing, let it air dry completely before reuse.

How to Sterilize LuvLap Breast Pump Parts Safely

Sterilization is especially important for newborn babies.

You can sterilize parts by:

boiling in water for 5–10 minutes
using electric sterilizers
steam sterilization units

Always allow parts to dry fully before reassembly.

LuvLap Breast Pump Losing Suction? Try These Quick Fixes

Low suction is one of the most common concerns mothers experience.

Possible reasons

worn duckbill valve
loose tubing
incorrect assembly
wrong flange size
moisture inside connectors

Solutions

replace damaged valves
tighten all connectors
reassemble correctly
choose correct flange size
ensure tubing stays dry

Replacing small accessories often restores suction immediately.

If your pump is still losing suction after checking valves and tubing, read our detailed guide on electric breast pump troubleshooting and common issues.